HP Laserjet 600 M602 – Always Defaults to Manual Feed

HP Laserjet 600 M602 – Always Defaults to manual Feed

Question:
Setting up a new HP LJ 600 M602dn. Printing from a workstation running Win8.1, using either the Universal Print Driver PCL6 or the printer-specific driver. Printer is set up on a network with a static IP address. Continue reading “HP Laserjet 600 M602 – Always Defaults to Manual Feed”

HP LASERJET P4014 HIGH CAPACITY TONER CARTRIDGE ISSUE

Question:
The business I work for have purchased a new HP Laserjet P4014  High capacity toner cartridge (CC364X).  The problem were having, when I put the HC toner cartridge into printer, the top lid won’t close because the toner cartridge physically too big.  The regular size cartridge has no problems with fitting.   Continue reading “HP LASERJET P4014 HIGH CAPACITY TONER CARTRIDGE ISSUE”

HP Laserjet CM1415fnw Error Code 59.C0

HP Laserjet CM1415 Error Code 59.C0

Question:
Would you be able to explain error code 59.c0 means?  The error came up after i installed a new toner cartridge.  i tried another new toner cartridge in case the cartridge or the chip was bad.  I only use OEM HP products.  The error code is not explained in the HP Website and the hp support page will not give an answer for this product.

Continue reading “HP Laserjet CM1415fnw Error Code 59.C0”

Change Display Language

Change dіѕрlау language frоm сhіnеѕе tо еnglіѕh оn LaserJet M1212nf MFP

how dо уоu change the dіѕрlау lаnguаgе from сhіnеѕе to еnglіѕh оn a LaserJet M1212nf MFP рrіntеr?
іt’ѕ dіѕрlау was еnglіѕh bеfоrе but someone сhаngеd it to chinese аnd wе dont knоw hоw to change the display lаnguаgе bасk tо еnglіѕh

Continue reading “Change Display Language”

MFP M225dn attached to network will not wake up and print after a short time online

MFP M225dn attached to network will not wake up and print after a short time online

 
Product Name: MFP M225dn
Operating System: Microsoft Windows 10 (64-bit)

This printer was working fine on both network PC’s for quite a while. Now after a very short time of it being started it won’t print. It seems like it won’t wake up on a print job from the network, which again worked fine until recently. If I turn it off and restart it, all the print jobs in the queue print, then a short while later, I do not know how long, it stops processing jobs again. I have verified the wake on print job settings and they are on.

Continue reading “MFP M225dn attached to network will not wake up and print after a short time online”