Printer Repair Experts - BEST PRINTER REPAIR NEAR ME | $59.99 ONSITE HP LASERJET SERVICE

EMAIL ADDRESS
info@printer-repair-experts.net

CUSTOMER CARE GROUP TELEPHONE
(888) 276-4666

HP Laserjet M610 Printer Service  |  HP Laserjet M611 Printer Service  |  HP Laserjet M612 Printer Service

HP LASERJET M610 PAPER JAM
HP LASERJET M610 FUSER ERROR
HP LASERJET M610 PERFORM PRINTER MAINTENANCE

HP LASERJET M611 PAPER JAM
HP LASERJET M611 FUSER ERROR
HP LASERJET M611 PERFORM PRINTER MAINTENANCE

HP LASERJET M612 PAPER JAM
HP LASERJET M612 FUSER ERROR
HP LASERJET M612 PERFORM PRINTER MAINTENANCE

HP Laserjet Enterprise M610,  M611, M612
Introduction Date: May 2020

Print Speed
M610 - 55 Pages Per Minute
M611 - 65 Pages Per Minute
M612 - 75 Pages Per Minute

Toner Cartridges
W1470A (Yield 10,500 pages)
W1470X (Yield 25,200 pages)

Maintenance Kit Part Number
L0H24A (110v)

 

The world’s greatest secure printer

The HP LASERJET M610, M611, M612 printer repair on their own from assaults in real-time whilst offer superior manageability. Quickly keep track of hazards, identify intrusions, and examine operating software along with centrally controlling your fleet without hassles

Elevated-speed functionality
Get your task completed with a printer fitted for high-speed efficiency and structured for energy productivity. Be self-confident that your staff members may speed thru their responsibilities minus trouble.


HP Laserjet M610, M611, M612 Printer Repair Error Codes

13.00.EE
Not known door open. Suggested

Remedy
1. Be sure that every one of the doors, as well as covers, is shut.
2. If your problem continues, suggest telephone Printer Repair Experts Customer Care (888) 276-4666.

13.00.FF
Recurring jammed paper.
This specific event offers no determined sensor noted. It might be any sort of sensor within the paper feed pathway and the needed jam accessibility point hasn't been located.

13.A1.A1
Document stay malfunction with bypass tray 1.
Documents couldn't exit the tray #1 feed sensor (PS4750) with the allocated quantity of time while printing through tray #1 - manual feed tray.

13.A1.D1
Paper delay jam from bypass tray 1
Paper did not reach the bypass tray 1 feed sensor (PS4750)  with the specified volume of time while printing out of tray #1.

13.A1.FF
Power up media jam at the bypass tray 1 feed sensor.
The bypass tray 1 feed sensor (PS4750) detects residual media present in the tray #1 paper feed guide assembly.

13.A3.FF
Recurring media jam inside Tray X.
This media jam comes about when Ongoing jammed paper. is recognized with the tray X feed sensor.

Suggested Remedy
1. Remedy the document jam.
a. Open the tray and take out any jammed documents, and after that shut the tray.
b. Open the particular rear & front door.
c.. Find and remedy any medium stopped or obstacles throughout the feed path.
d. Closing the rear & front door allowing the printer to try to take away the jammed
paper error message.
2. If the error continues, feel free to consult with Printer Repair Experts Customer Care (888) 276-4666.

13.AA.EE Front Door Open
The front door is ajar while printing.

Suggested Remedy
Shut the rear and front door allowing the printer in order to attempt to pass the media jam service error.

13.AB.EE Rear Door Open Shut the rear and front door allowing the printer as it tries to push the media jam error code.

Suggested Remedy
Shut the front door & rear door allowing the printer to attempt to push through the paper jam error message.

13.B2.Az Jam in the rear door
Document present jam inside rear door inside the image section

13.B2.A1
This media jam happens as soon as the registration sensor (PS4550) identifies media found longer than the estimated time situated on the size of the pages during printing within bypass tray 1.

13.B2.A2
This paper jam happens as soon as the registration sensor (PS4550) registers material stopped much longer than the required time depending on the paper size while printing by Tray 2.

13.B2.AD
This paper jam shows while the registration sensor (PS4550) finds Document found lengthier time than the required depending along with the paper size during printing using duplexer.

13.B2.D1 Jam in the rear door
Paper delay media jam in the rear door right at the image region.
Pages passed manual feed tray #1 feed sensor PS4750 but did not reach registration sensor (PS4550) in specified time when printing from Tray 1.

Suggested Remedy
1. Take away the media jam.
a. Open the rear door.
b. Check for and take out any document in the back of your primary transfer assemblyand the back of the lower jam access cover.
c. Shut the rear and front door to enable the printer as it tries to pass the paper jam service error.
2. Confirm the media type and level of quality of the media being employed matches the HP standards for the HP LaserJet Enterprise M610, M611, M612 printer.
3. Be sure that the bypass tray 1 pickup| separation rollers are in use HP Laserjet M610, M611, M612 Printer Repair appropriately and present no damages or deterioration.
4. Cleanse or change out the feed, separation, and pickup rollers as required.

Messages:
Cleanse the rollers along with a moist lint-free towel or paper.

5. In case the problem remains, suggest you telephone Printer Repair Experts Customer Care (888) 276-4666.

13.B2.D2 Jamat rear door
Pages delay jam inside the image location.
Media didn't make it to the registration sensor (PS4550) in determining time while printing with Paper Tray #2.

13.B4.FF Jam in the rear door
Document residual jam inside image region.
Pages found at fuser loop sensor PS4500 at printer startup or following removing a jam.

13.B9.Az Fuser jam
Pages stay jam in the fuser region
Document stopped at PS4650 after a stipulated time frame.

13.B9.FF
leftover paper jam as part of the fuser output sensor.
Media is found at PS4650 at printer startup or just after removing a jam.

13.E1.D3 Fuser Area Jam
Output delivery lag time jam. The document failed to make it to the output bin full sensor promptly.

13.FF.FF
A power-up residual paper jam has appeared.
This event lacks a determined sensor delegated. It might be any sensor through the paper feed path. Suggested Remedy
1.Comply with the directions displayed on the control panel to remedy the document jam.   Ensure no doors become open.
a. Open the rear door.
b. Find and remedy any paper stopped or barriers in the paper path.
c. Closing the rear and front door allowing the printer to try to take away the media jam error code.
d. Should the errors persist, suggest consulting with Printer Repair Experts Customer Care (888) 276-4666.

 

All
HP Laserjet Printer Maintenance Kits,
HP Paper Jam Kits,
HP Roller Kits
and Fuser Assembly
in Stock

 
 
HP LASERJET M610, M611, M612 FUSER ERRORS

50.2X.YZ
Fuser warm-up error

50.2F.00

50.3X.YZ
High fuser temperature

50.4X.YZ
Drive circuit fault

50.6X.YZ
Open fuser circuit (heating element failure)

50.7F.00
Fuser pressure-release mechanism failure

50.8X.YZ
Low fuser temperature 2

50.9X.YZ
High fuser temperature 2

50.AX.YZ
Low fuser temperature 3

50.BX.YZ
High fuser temperature 3

Suggested Remedy
1. Power down printer.
2. Take out and install the fuser. Confirm that the fuser is installed accurately. 

CAUTION:
The fuser might be hot. 

a. Open the rear door.
b. Take hold of the blue handles on each side of your fuser and take it out.
c. Verify that there's no residual document within the fuser.
d. Take out and reseat the fuser.
e. Close the front door.
3. Should the malfunction continues, suggest to telephone Printer Repair Experts Customer Care (888) 276-4666.  

51.00.yz
An malfunction at the laser/scanner assembly has developed in the printer.

51.00.10 Beam detect error

51.00.19 Laser malfunction

52.00.00/52.00.20 Scanner Startup/Rotation error
A printer laser/scanner error developed.

52.00.00 laser/scanner startup error.

52.00.20 laser/scanner rotation error. 

Suggested Remedy
1. Turn the printer off, and then on.
2. In the event that the error continues, consider calling Printer Repair Experts Customer Care  Telephone: (888) 276-4666.

Printer Repair Experts
Customer Care Telephone

(888) 276-4666 Toll Free

ONLINE HP PRINTER REPAIR SUBMISSION FORM

You can request an onsite HP Printer Repair through the online submission system. Please fill out the form below and one of our friendly Customer Care Representatives will contact you to confirm a date and time for the service. The representative will also be able to answer any questions you may have. You are also welcome to submit comments or concerns here.-

Telphone (888) 276-4666

Email: info@printer-repair-experts.net

Forms of Payment we Accept

payments-we-accept-printer-repair-services