HP Laserjet M605 Printer Repair
HP LASERJET M604 PRINTER REPAIR
HP LASERJET M604 PAPER JAM
HP LASERJET M604 FUSER ERROR
HP LASERJET M604 PERFORM PRINTER MAINTENANCE
HP LASERJET M605 PRINTER REPAIR
HP LASERJET M605 PAPER JAM
HP LASERJET M605 FUSER ERROR
HP LASERJET M605 PERFORM PRINTER MAINTENANCE
HP LASERJET M606 PRINTER REPAIR
HP LASERJET M606 PAPER JAM
HP LASERJET M606 FUSER ERROR
HP LASERJET M606 PERFORM PRINTER MAINTENANCE
HP Laserjet Enterprise
M604, M605, M606
Introduction Date:
April, 2015
Print Speed
M604 – 52 Pages Per Minute
M605 – 58 Pages Per Minute
M606 – 65 Pages Per Minute
Toner Cartridges
CF281A (HP 81A) 10,500 Yield
CF281X (HP 81X) 25,000 Yield
Maintenance Kit
F2G76-67901
HP LaserJet M604, M605, M606 - 50.22 error
Problem:
This specific page is target to the following HP Laserjet Printers:
HP LaserJet Enterprise M604
HP LaserJet Enterprise M605
HP LaserJet Enterprise M606
Once the 50.22.00 or a 50.22.11 message displays within control panel, it suggests an issue in regard to the fusing assembly warming up.
Solution
1: Reset power to to the device.
Turn the device off, then switch back on to clear the error.
Unhook the hp device from any power suppressor, and plug-in directly right into a wall connector. Verify the hp printer is hooked inside the accurate voltage plug that accommodates the HP LaserJet’s essential voltage. Ensure the hp printer possesses the most up to date firmware installed.
2: Confirm media type
Examine the paper type chosen matches the type used inside the printer. Consider the media specific (Windows). From the software program, select the Print method. Pick the printer, then press the Properties or Preferences option.
Press the Paper/Quality tab. Starting with the media type drop-down list, click the More… option.
Broaden the list of Type is: selection.
Stretch the section of paper types that appropriately details your media.
Pick your paper specifications (Mac OS X).
Choose the File menu, and next press the Print option. In the Printer menu, pick the Hp Printer. By OEM specifics, the print driver displays the Copies as well as Pages menu. Open the printer’s menu’s drop-down checklist, thereafter click the Finishing menu.
Select a type within the Media Type drop-down selection.
3: Making sure of the print mode option.
From the Home screen within the control interface, Press the Administration option. touch General Settings.touch Print Quality. Press Adjust Paper Types. Choose a paper type, following choose the mode to adjust. Push a value towards the mode, following press the Save button.
4: Fuser Reseat
Your current printer might look a little different than the HP LaserJet Enterprise 600 M601 printer shown. Power off the printer.
Pull the rear output bin. Position your finger near the left-side hinge and squeeze securely to the right until the hinge-pin away from the hole inside the printer. Spin the output bin outward to remove it.
Move up on the 2 blue levers along the sides with the fixing assembly and remove the fuser straight-out. Remove the fuser assembly away of the hp device to remove it. Paper could possibly be jammed within the fixing assembly where it might not be visible.
WARNING: The fuser assembly might-be hot while the HP LaserJet is operating. Raise the black plastic guide on the top on the fusing assembly to pull out the any pages jammed inside the fuser.
WARNING: Don’t utilize a Metal and Sharp object to remove media from your HP fuser. It might damage the fuser.
Pushing the fixing assembly solidly into the hp printer till the blue levers on each side click into place.
Reinstall the optional duplexer accessory, whether or not this was removed.
Figure: Reinstall Duplex accessory.
Plug the power cord into the printer.
Figure: Plug in the power cord
Turn on the printer.
Figure: Turn on the printer
5: Replace the fuser
In case the error message continues after doing the above strategies, swap the fusing assembly.
Use the table above to identify the recommended part no# on your printer, and then go to www.Printer-Repair-Experts.net to purchase the assembly.
HP LaserJet Enterprise M604-M606 printers
F2G76A 110-volt printer
F2G77A 220-volt product
To Schedule an onsite service appointment
Call Toll free Printer Repair Experts (888) 276-4666
HP LASERET M604, M605, M606 ERROR CODES: 10.XX.YZ Problem Note
10.00.00 Memory Problem e-label
The printer is not able to read the Toner Cartridge info.
10.00.10 Unreadable Memory e-Label Error
HP laserjet printer is incapable to identify the e-label.
10.00.15 Install cartridge
The suggested cartridge has been removed or installed improperly.
10.00.33 Rebuilt Installed
A Used supply is in being used (end of life).
10.00.34 Rebuilt supply in use
A supply is Used.
10.00.35 incompatible toner cartridge installed
An Non HP toner cartridge is being utilized
10.00.40 legitimate HP supplies used
Illegitimate HP Toner Cartridge has been in use.
10.00.41 Unsupported toner cartridge being utilized
The installed toner cartridge is for an alternative printer.
10.00.60 Cartridge lower (Black)
The toner low (Black)
10.00.69 toner really low (Black)
The Toner Cartridge very low (Black)
10.00.70 Printing past minimal
The hp printer suggests when a toner cartridge amount is very low. The correct residual toner lifespan may change.
10.00.91 Broken toner motor.
non operable toner motor.
10.23.15 Reseat Fuser Kit
The showed cartridge has been taken out or put in inaccurately.
10.23.35 incompatible supply
The suggested toner cartridge is Non OEM with this printer.
10.23.60
The printer shows when fusing kit is minimal. The real remaining Fusing Assembly life time may vary.
You don’t need to change out the Fusing Assembly at this time only if print quality is not tolerable.
10.23.70 printing after very low Fusing Assembly
The hp printer indicates when the Fusing Kit is minimal. The actual remaining Fusing Kit life expectancy might change.
10.26.15
The hp printer indicated when the maintenance may need to be replaced.
10.26.50
The maintenance kit was reset.
10.26.60
The hp printer suggested when the maintenance kit is really low. The exact remaining maintenance kit life span could change.
If you have any questions or would like to schedule an onsite service appointment
(888) 276-4666 Customer Care Group
HP LASERET M604, M605, M606 - 11.XX.YZ Problem Messages
11.00.01 or 11.00.02 Internal clock Problem
The printer real time clock has undergone an Error.
01=clock not usable
02=clock dead real
HP LASERET M604, M605, M606 - 13.XX.YZ Malfunction Messages -
13.00.00
Basic paper jam Message code.
13.00.EE
Unidentified door open.
13.A2.D2
Tray 2 print feed jam.
This paper jam shows when the media does not reach the Tray 2 pre-feed sensor (PS102) in the specific period of time after the beginning of media pick-up from Tray 2. It’s a no-pick jam from tray 2.
13.A2.Dx
13.A2.FF
Recurring paper jam inside Tray 2. This jammed paper shows when Recurring pages is discovered at the Tray 2 feed sensor (PS102).
13.A3.FF
Residual jammed paper in Tray 3. This jam shows when remaining paper is detected at the Tray 3 feed sensor (PS102).
13.B2.Az Jam in top cover
Media STAY jammed paper in top cover at image location. Pages shows at PS103 after specified time limit exceeded
13.B2.Dz Jam in top cover
Recurring delay paper jam in top cover at image area. Media did not reach PS103 in specified time.
13.B2.E2 media jam in top cover
media jam in top cover at image region caused by door open.
13.B2.FF media jam in top cover
Print Residual jammed paper in top cover at image area. Paper present at PS103 at power on or after clearing media jam.
13.B9.Az Fuser media jam
fuser Kit delivery stay. Print stay jam at fuser area. Paper present at PS700 after specified time limit. This jam code may be Compatible by; An accordion paper jam at the fuser exit, something blocking the media before the delivery output rollers. The output bin rollers not spinning, there is very little bit distance from the fusing Kit exit and the output bin.
13.B9.Bz fusing Kit jam
Multi-feed jam in fusing Assembly. This paper jam occurs whenever a nearly complete overlap multi-feed jammed paper is found.nearly complete
13.B9.Cz
fusing Kit Wrap page jam. This media jam takes place when the media goes away from the fusing Assembly output sensor before a allocated amount of time after the prints reached the fuser Kit output sensor (PS700). (The printer has decided that the prints is being wrapped around the fuser Kit roller.)
13.B9.Dz
Fuser delivery delay paper jam paper couldn’t touch Fuser sensor PS700 defined time.
● 13.B9.D1
Fusing Assembly delivery delay media when printing within Tray 1.
● 13.B9.D2
Fusing Assembly delivery delay page jam when printing at Tray 2.
● 13.B9.D3
Fusing Kit delivery delay page jam when printing from Tray 3.
● 13.B9.D4
Fuser Kit delivery delay media at Tray 4.
● 13.B9.DD
Fusing Assembly delivery delay media when printing with the Duplexer.
If you have any questions or would like to schedule an onsite service appointment
(888) 276-4666 Printer Repair Experts Customer Care Group
13.B9.FF
Residual Media jam Fuser Output Sensor. pages exist at PS700 after specified time period or on turn on.
13.D3.B!, 13.D3.B2, 13.D3.B3, 13.D3.B4, 13.D3.B5, 13.D3.B6, 13.D3.B7, 13.D3.B8, 13.D3.B9
Multi-feed to duplex re-feed jammed paper
13.D3.Dz
Late to duplex re-feedjam.
● 13.D3.D1
The fuser is printing in fuser mode Auto Sense special case differentiated from “typed” Normal.
● 13.D3.D2
The fusing Kit is printing in fuser mode Normal.
● 13.D3.D3
The fusing Kit is printing in fuser mode Light 1 or Light 2
● 13.D3.D4
The fusing Kit is printing in fuser mode Heavy 1.
● 13.D3.D5
The fuser Assembly is printing in fuser mode Heavy 2.
● 13.D3.D6
The fuser Kit is printing in fuser mode Heavy media 3.
● 13.D3.D7
The fusing Kit is printing in fuser mode Glossy media 1.
● 13.D3.D8
The fuser Kit is printing in fuser mode Glossy media 2.
● 13.D3.D9
The fuser Kit is printing in fuser mode Glossy media 3.
13.E5.FF
A power on jam has taken place.
13.EA.FF
A door media jam has comes about.
13.EE.FF
A door jammed paper has happens.
13.FF.EE
A power on jam has happens.
13.FF.FF
A start up residual jammed paper has happened. This Problem has no particular sensor marked. It could be any sensor in the media page path.
HP LASERET M604, M605, M606 - 20.XX.YZ Error Messages
HP Laserjet M605 Printer Repair
20.00.00 insufficient memory
Hp laserjet printer fails to have sufficient memory to print the page. The hp printer was given additional data than can integrate into the presented memory. You could have attempted to alocate too many macros, soft fonts, or complex graphics.
21.00.00 Page Too involved Event log Error message 21.00.00.
The hp printer displays this message to indicate that the page decompression process was too slow for the
printer.
HP LASERET M604, M605, M606 - 32.XX.YX and 33.XX.YZ Malfunction Messages
32.08.A1, 32.08.A2, 32.08.A3
Shutdown event-boot after irregular shut off.
HP Laserjet M604, M605, M606
41.XX.YZ Malfunction Messages
42.XX.YZ Problem Messages
47.XX.XX Malfunction Messages
48.XX.YY Error Messages
49.XX.YY Error Messages
40.00.01 USB I/O buffer overflow To continue, press “okay”
The USB buffer has overƮowed.
40.00.02 Embedded I/O buffer To continue, touch “okay”
The printer has sustained a JetDirect buffer overflow
40.00.03 EIO buffer overƮow To continue, touch “O.K.”
Too much data was sent to the EIO card in the specified slot (x). An incorrect communications protocol might be being utilized.
40.00.04 EIO bad transmission To continue, touch “O.K.”
The connection between The printer and the USB device has been broken.
41.XX.YZ Malfunction Messages
41.01.YZ
Event log Error message: 41.01.YZ.
An unknown misprint Malfunction occurred on Hp laserjet printer.
Y = Type, Z = Tray
41.02.00 Error
A beam detected misprint Malfunction occurred.
If you have any questions or would like to schedule an onsite service appointment
(888) 276-4666 Customer Care Group
41.03.02 with slow printing
Some circumstances of slow printing along with 41.03.02 have been induced by timing issues with the recommended size prints inserted.
41.05.YZ Unexpected type in tray
Hp laserjet printer can discover the type of media within paper path, and it adjusts the print mode correctly.
Tray X is lfilled with a paper type that is different than what they paper tray is set up to use.
41.XX.YZ Malfunction To continue, touch “Okay”
This chapter covers all other Problems of the form 41.XX.YZ not covered in the previous sections. A printer Problem has occurred.
42.XX.YZ Problem Messages
42.XX.YZ
Internal system failure.
47.XX.XX Malfunction Messages
47.00.XX
Back channel internal Malfunction.
47.01.XX
Image transformer internal Problem.
47.02.XX
Job parser internal Problem.
47.03.XX
Print job internal Problem
47.04.XX
Print spooler 9100 internal Problem.
47.05.00
Print spooler framework internal Error.
47.06.XX
Print application internal Malfunction.
48.XX.YY Error Messages
48.XX.YY
A job framework internal Error has occurred.
49.XX.YY Error Messages
49.XX.YY Error To continue to turn off then on
firmware Error shows. Dangerous print jobs, software application complications, non-product specific print drivers, sub-standard USB or network cables, wrong network connections or inaccurate designs, bad firmware operations, or unsupported accessories can cause this Malfunction.
HP LASERET M604, M605, M606 - 50.WX.YZ Malfunction Messages
50.10.YZ Fuser Malfunction
Reduced temperature thermistor 2.
Y = previous printing device sleep status, Z = following status
50.11.YZ Fuser Malfunction
High temperature thermistor 2.
Y = earlier printer sleep level, Z = subsequent printer sleep state
50.12.YZ Fuser Error
Fuser pressure release mechanism failure.
Y = prior printing device sleep status, Z = upcoming level
If you have any questions or would like to schedule an onsite service appointment
(888) 276-4666 Customer Care Group
50.2X.YZ Fuser Error
Fuser warm up failure.
Y = prior printer sleep status, Z = following condition
50.3X.YZ Fuser Problem
Low temperature thermistor 1.
Y = previous device sleep state, Z = next status
50.4X.YZ Fuser Problem
High temperature thermistor 1.
X = fuser mode, Y = former printer sleep level, Z = subsequent printer sleep state
50.6X.YZ Fuser Problem
Drive circuit fault.
Y = previous device sleep condition, Z = next condition
50.7X.YZ Fuser Problem
Fuser Pressure release failure.
X = fuser mode, Y = prior device sleep condition, Z = next condition
50.9X.YZ Fuser Error
Low fuser temp 2 Problem.
X = fuser mode, Y = previous printer sleep state, Z = upcoming condition
HP LASERET M604, M605, M606 - 51.XX.YZ, 52.XX.YZ Problem Messages
51.00.YY
Laser/scanner Malfunction.
● YY = 20
Black laser/scanner Malfunction
52.XX.00
Laser/scanner Malfunction.
● XX = 00
laser/scanner motor startup Error.
● XX = 20
Laser/scanner rotation Malfunction.
HP LASERET M604, M605, M606 - 54.XX.YZ Malfunction Messages - 55.XX.YZ, 56.XX.YZ Malfunction Messages - 57.XX.YZ Problem Messages - 58.XX.YZ Problem Messages - 59.XX.YZ Problem Messages
54.00.03 Problem
A sensor Malfunction has appeared. Environmental sensor (TH3) malfunction.
54.06.21 Error
A sensor Error has occurred. Primary laser/scanner beam detect problem.
55.XX.YZ, 56.XX.YZ Malfunction Messages
55.00.yy To continue turn off then on
DC controller PCA Malfunction.
● 55.00.01 (log event)
DC controller memory Malfunction.
● 55.00.03 (event code
DC controller no engine response.
● 55.00.04 (event code
DC controller communications time-out.
55.0x.yy to continue off on
DC controller PCA Error.
● 55.01.06 (log event)
NVRAM memory data Error warning.
● 55.02.06 (log event)
NVRAM memory access Malfunction notification.
56.00.yy to continue off on
Optional cassette tray communication Error.
57.00.01 to continue off on
Main fan (FN101) failure.
57.00.02 in order to continue off on
toner front-side fan (FN103) malfunction.
57.00.03 to continue off on
Toner Cartridge front-side fan (FN301) failure.
57.00.04 to continue off on
Laser/scanner fan (FN102) problem.
57.00.05 to continue off / on
Duplex fan (FN107) failure.
58.XX.YZ Problem Messages
58.00.03 Problem
DC controller CPU breakdown.
58.00.04 Malfunction
The printer sustained a LVPS (Low Voltage Power Supply) breakdown.
58.00.05 Malfunction
Environmental sensor (TH3) breakdown.
58.01.04 Error
24V power supply Problem during operation. During regular printing operation the 24V power cartridge experienced an Malfunction.
58.02.04 Malfunction
24V power toner cartridge Problem during boot or wake. During printer power on or when waking from sleep mode, Hp laserjet printer experienced an Error with the 24V power toner cartridge.
If you have any questions or would like to schedule an onsite service appointment
(888) 276-4666 Customer Care Group
59.XX.YZ Problem Messages
59.00.YY Problem — To continue off on
A motor Malfunction has occurred.
● YY = Motor
Paper path malfunction.
59.00.20
Feed motor (M101) malfunction (start-up or rotational).
59.00.30
Fuser motor (M299) malfunction.
59.00.40
Fuser motor (M299) fail to function properly (start-up or rotational).
59.00.90
Feed motor (M101) fail to function properly.
59.05.50, 59.50.60, 59.05.70
Drum motor startup Problem, Drum motor (M102) fail to function properly.
59.A2.YY Problem
A printer Error has manifested.
FAQ's - Frequently Asked Questions
Frequent issues include paper jams, fuser errors, and print quality problems like streaks or fading.
Yes, on-site repairs are available for both businesses and home offices.
Call our Customer Care Group (888) 276-4666 to schedule an Onsite Printer Repair
Repair costs vary based on parts needed and labor, but they are typically more cost-effective than replacing the printer.
We currently have a New Client Promotion – $59.99 Onsite Printer Repair
Call our Customer Care Group to Schedule an onsite Printer Repair (888) 276-4666
Yes, We guarantee our parts and service for period of 180 days (6 Months). Call our Customer Care Group to schedule an onsite printer repair (888) 276-4666
HP LASERET M604, M605, M606 - 60.00.0Y, 62.00.00 Malfunction Messages - 65.X0.AZ Problem Messages - 80.XX.YY, 82.XX.YY Problem Messages - 98.0X.0Y Malfunction Messages
60.00.0X Tray X lifting Malfunction
The tray lift motor Problem has happened.
60.00.02
Tray 2 lifter driver assembly failure.
60.00.12 to 60.00.15
Tray 3 lifter driver assembly failure.
62.00.00 To continue turn off then on.
Internal system failure.
65.X0.AZ Problem Messages
65.X0.A1 Output accessory disconnected
Your external paper handling accessory connection has been cut off.
66.WX.YZ Error Messages
70.XX.YY Malfunction Messages
70.00.00 Error To continue turn off then on
DC controller failure.
80.XX.YY, 82.XX.YY Problem Messages
80.0X.YY Embedded Jetdirect Problem
An Embedded HP JetDirect print server critical Problem has occurred.
● 80.01.80: No heartbeat
● 80.01.81: Reclaim timeout
● 80.01.82: Invalid data length
● 80.01.8B: Invalid max outstanding packet header field
● 80.01.8C: Invalid channel mapping response
● 80.03.01: No PGP buffers
● 80.03.02: Channel table full
● 80.03.03: Producer index not reset
● 80.03.04: Consumer index not reset
● 80.03.05: Queue position size too small
● 80.03.06: Transport overƮow
● 80.03.07: No overƮow packets
● 80.03.08: Invalid identify response
● 80.03.09: Invalid channel map return status
● 80.03.10: Invalid reclaim return status
● 80.03.12: Datagram invalid buffer
● 80.03.13: Max stream channels
● 80.03.14: Max datagram channels
● 80.03.15: Card reset failed
● 80.03.16: Self-test failure
● 80.03.17: Unknown PGP packet
● 80.03.18: Duplicate I/O channel
82.73.46, 82.73.47
A hard disk or compact Ʈash disk cleaning failed. This Problem is usually Rebuilt by a failure of the disk hardware.
98.0X.0Y Malfunction Messages
98.00.01 or 98.01.00 Corrupt data in firmware volume
Data corrupt has occurred in the firmware volume.
If you have any questions or would like to schedule an onsite service appointment
(888) 276-4666 Customer Care Group
99.XX.YY Malfunction Messages
99.00.01 Upgrade not performed file is corrupt
A remote firmware upgrade (RFU) was not performed. This is a CRC Problem in the firmware image (bad image).
99.00.02 Upgrade not performed time-out during receive
A remote firmware upgrade (RFU) was not performed. The issue is an I/O time-out when understanding the header number and size. It indicates a problem with the network environment, not The printer.
99.00.03 Upgrade not performed Error writing to disk
A remote firmware upgrade (RFU) was not performed. This is a disk Malfunction. It might indicate a problem or a hard disk failure. It might be necessary to check the connection to the hard disk or replace the hard disk.
99.00.04 Upgrade not performed time-out during receive
A remote firmware upgrade (RFU) was not performed.
99.00.05 Upgrade not performed time-out during receive
A remote firmware upgrade (RFU) was not performed. The issue is an I/O time-out when reading image data.
99.00.06 Upgrade not performed Problem recognizeing upgrade
A remote firmware upgrade (RFU) was not performed. The issue is an unexpected read Problem when recognizeing the header number and size.
99.00.07 Upgrade not performed Error understanding upgrade
A remote firmware upgrade (RFU) was not performed. The issue is an unexpected recognize Malfunction when recognizeing the rest of the header.
99.00.08 Upgrade not performed Malfunction recognizeing upgrade
A remote firmware upgrade (RFU) was not performed. The issue is an unexpected read Error when reading image data.
99.00.09 Upgrade canceled by user
A remote firmware upgrade (RFU) was not performed. The RFU was canceled by the user.
99.00.10 Upgrade canceled by user
A remote firmware upgrade (RFU) was not performed. The RFU was canceled by the user when reading the header number and size.
99.00.11 Upgrade canceled by user
A remote firmware upgrade (RFU) was not performed. The RFU was canceled by the user when recognizeing the rest of the header.
99.00.12 Upgrade not performed the file is invalid
A remote firmware upgrade (RFU) was not performed. The header number is 1, but the header size does not match version 1 size.
99.00.13 Upgrade not performed the file is invalid
A remote firmware upgrade (RFU) was not performed. The header number is 2, but the header size does not match version 2 size.
99.00.14 Upgrade not performed the file is invalid
A remote firmware upgrade (RFU) was not performed. The file is invalid.
99.00.2X
There is a compatibility issue with the firmware. The specific message varies depending on the cause, but the solution for each message is the same.
● 99.00.20 The bundle is not for this printer.
● 99.00.21 The bundle is not signed with the correct signature, or the signature is invalid.
● 99.00.22 The bundle header version is not supported by this firmware.
● 99.00.23 The package header version is not supported by this firmware.
● 99.00.24 The format of the bundle is invalid.
● 99.00.25 The format of the package is invalid.
● 99.00.26 A CRC32 check did not pass.
● 99.00.27 An I/O Malfunction occurred while downloading the bundle.
99.01.XX
A firmware install Problem has occurred. The specific message varies depending on the cause, but the solution for each message is the same.
● 99.01.00
● 99.01.10
● 99.01.20
● 99.01.21
99.02.01
Firmware installation was successful.
99.02.09
Firmware upgrade cancelled by user.
99.09.60 Unsupported disk
This is a Preboot menu Error. The hard disk currently installed is not recognized or supported by The printer.
99.09.61 Unsupported disk
This is a Preboot menu Error. The installed disk is installed in a printer configured for an encrypted hard disk.
99.09.62 Unknown disk
This Error implies that there is an encryption mismatch between the hard disk drive and the formatter. This typically happens because an Hard drive was swapped into a printer from another printing device.
99.09.63 Incorrect disk
This Malfunction means that the expected encrypted Hard drive is not present. This is expected behavior when installing a brand-new Hard drive in a equipment where the preceding Hard drive was encrypted.
99.09.64 Disk Nonfunctional
A fatal hard disk failure has occurred.
99.09.65 Disk data Problem
Disk data problem has happened.
99.09.66 No boot device.
A disk drive is not set up in The hp printer.
99.39.64 eMMC malfunctioning
The eMMC is not working.
99.39.67 eMMC Not Bootable
99.XX.YY
A message of this type indicates a firmware update Error.
If you have any questions or would like to schedule an onsite service appointment
(888) 276-4666 Customer Care Group