HP Jetdirect Firmware Upgrade Instructions

Overview

There are several supported methods to perform a firmware update on a Jetdirect Print Server depending on whether you are updating a single print server or multiple print servers at one time.

This document provides instructions on how to update the Jetdirect Print Server firmware for a single Enterprise printer when the printer is in a ready state using either the Jetdirect EWS or FTP.

For instructions on how to update the firmware for multiple Jetdirect Print Servers at one time, go to Update Firmware for multiple HP Jetdirect Print Servers using HP Download Manager or Web Jetadmin (c03754288) (in English).

To update the firmware, download the Jetdirect firmware file images to a computer using the links provided in this document, and then use only one of these methods, Jetdirect EWS or FTP.

In most circumstances, the Jetdirect Embedded Web Server (EWS) method is used to update a single print server.

If the print server is on a network that does not have Internet access, you can use a laptop with internet access to download the firmware file (from the links provided in this document), and then take the laptop to the network where the print servers are located to perform the firmware update.

NOTE: A few HP Jetdirect models cannot be updated. In this document, only those HP Jetdirect print servers that can be updated are listed. If an HP Jetdirect model is not listed below, it is because it cannot be updated.

What you need to know

Before performing a firmware update, review these requirements:

Image file downloads for HP Jetdirect Print Server Firmware are embedded on this page. Use Ctrl+F to find your JetDirect model below.

A firmware update can require 5 to 10 minutes or more to complete depending on the speed of the computer and the connection speed and type to the printer network, and any print jobs pending in the printer queue.

For print servers on a network without internet access, you must first download the firmware files individually from this document onto a computer WITH internet access, and then take the laptop to the network where the print servers are located.

Access to some menus on the control panel might require administrator privileges or a passcode.

Step one: Print a Configuration page

To obtain the IP address and determine the JetDirect Print Server model number currently in use with the printer, make sure the printer is in a ready state, and then print a configuration page.

NOTE: If the printer is in an error state, resolve the error first.

Make sure the printer is in a ready state.

NOTE: A ‘ready’ state is indicated either when ‘Ready’ displays on the control panel, or after the printer finishes initializing and all lights illuminate solid.

Use one of the following methods to print a Configuration Page.

From the TEST button of an external Jetdirect.

From the Home screen on the printer control panel.

From the Jetdirect Embedded Web Server (EWS).

On the printed Configuration Page, look in the “Device Information” section for the JetDirect Print Server model number similar to the following example:

J6044A – model number typically starts with a ‘J’ followed by 4 numbers, and then ending with a letter such as ‘A’.

Step two: Download the Jetdirect firmware

Make sure the printer(s) is in a ready state and connected via a network.

Press Ctrl+F, paste or type your Jetdirect model number, and press Enter to find your JetDirect model inJetDirect Firmware Downloads section below.

Right-click the .dld file name in the links below, select Save Target as or Save as.

From the Save in: drop-down, select a location such as your desktop where you can easily locate the file.

In the “Save as Type” drop-down, select All Files, select .dld, and then click Save.

Figure 1: Saving the firmware image as All Files type

NOTE: Your browser may default to save the .dld file as a text file. If it saves the file as a .txt, you can rename the file by replacing the .txt file extension with .dld.

Step three: Update the firmware

Use only one of the following methods to update the firmware of a single print server. If the printer is in an error state, resolve the error first.

When using the FTP methods, consider the following security conditions before continuing:

The FTP download process checks if the file is valid.

If Telnet is disabled, an FTP download is not allowed.

If Telnet is enabled and an administrator password is set, the administrator password must be entered at the password prompt, to gain access to FTP download capability. The username prompt can be left blank, or use one of four valid usernames: root, admin, administrator, or supervisor.

Entering a password is not necessary to print (which preserves backward compatibility), and printing is not affected if the password is set.

Method one: Jetdirect Embedded Web Server (EWS)

Some HP Jetdirect models, depending on their firmware version, can use the HP Jetdirect Embedded Web Server (EWS) to update the firmware remotely for a single printer – no extra software required. These steps should only be used if the printer is able to boot to READY.

NOTE: An internet or local network connection is required to update the HP Jetdirect firmware using this method. The Jetdirect firmware must be greater than x.24.00 to have this feature available.

Make sure the printer is connected to the local network.

Turn the printer On, and then wait until it arrives at a Ready state.

NOTE: If there is an error message displayed on the control panel, resolve the error first.

Open a Web browser, and in the address field, type the IP address exactly as it appears on the Configuration Page, and then press Enter.

The Embedded Web Server (EWS) opens.

Click the Networking tab.

Click Other Settings and then click Firmware Upgrade.

Click Browse and select the firmware file you downloaded previously.

NOTE: Do not close the browser window until the HP Embedded Web Server (EWS) displays the confirmation page.

Click Upgrade Firmware.

When the update is complete, a status message displays and the HP Jetdirect card automatically restarts.

NOTE: As the Jetdirect card restarts, the Web browser might appear stalled until the HP Jetdirect card is back on the network.

Method two: FTP using an Internet browser

Make sure the printer is connected to the local network.

Turn the printer On, and then wait until it arrives at a Ready state.

NOTE: If there is an error message displayed on the control panel, resolve the error first.

Open the FTP site for the print server.

Open a Web browser.

In the URL address field in place of http://, type ftp://xxx.xxx.xxx.xxx /DOWNLOADreplacing ‘xxx.xxx.xxx.xxx’ with the actual IP address of the HP printer/Jetdirect, and then pressEnter.

NOTE: Be sure to include a space between the last character of the IP address and /DOWNLOAD.

Within the FTP site, from the Page Arrow Down, select Open the ftp site in Windows Explorer or a file manager window.

Navigate to the file you downloaded previously, and then copy and paste (or drag and drop) the file from Windows Explorer or the file manager window into the FTP window.

If you receive an error message, click OK to ignore it. This indicates that the new firmware update is complete but only available in English.

Repeat the steps above to update the firmware a second time.

NOTE: If the second update is not performed, the HP Jetdirect print server will have only English and no other languages for the management interfaces (print control panel menus, embedded Web server, as well as the configuration page). To obtain all available languages, update the firmware a second time.

Close the FTP.

Method three: FTP using a DOS prompt

Some HP Jetdirect models, depending on their firmware version, can use the FTP method to update the firmware remotely for a single printer – no extra software required. These steps should only be used if the printer is able to boot to READY.

Make sure the printer is connected to the local network or internet.

Turn the printer On, and then wait until it arrives at a Ready state.

NOTE: If there is an error message displayed on the control panel, resolve the error first.

Type the following commands.

Type ftp xxx.xxx.xxx.xxx replacing ‘xxx.xxx.xxx.xxx’ with the actual IP address of the HP printer/Jetdirect, and then press Enter.

NOTE: Be sure to include a space between ftp and the first character of the IP address.

At the prompt for a user name/account, press Enter.

NOTE: The HP Jetdirect print server will accept all passwords or blanks for the username, so in most cases just press Enter.

At the Password prompt, press Enter.

NOTE: If Telnet is enabled and an administrator password is set, the administrator password must be entered at the password prompt.

At the ftp prompt, type bin and press Enter.

Type hash and press Enter.

NOTE: This command is optional – it shows a display of the download progress and can be useful if the download takes a few minutes.

Type cd DOWNLOAD and press Enter.

Type put c:\filename.dld and press Enter.

NOTE: “filename.dld” is the firmware image file. Be sure to type in the full path to the file and be sure to type the filename correctly. For this reason it is easiest to make sure the .dld file is at the root directory. This command is case-sensitive.

Wait a couple of minutes. The firmware update is complete when the message, “Transfer complete” is displayed.

If you receive the message “Netout: Software caused connection abort”, repeat the steps above to update the firmware a second time.

NOTE: If the second update is not performed, the HP Jetdirect print server will have only English and no other languages for the management interfaces (print control panel menus, embedded Web server, as well as the configuration page). To obtain all available languages, update the firmware again.

Type bye and press Enter to close the FTP.

top

JetDirect Firmware file downloads

Use the following list (by product type and number) to locate your JetDirect Print Server model, and then right-click the associated file and follow the link instructions to download the firmware file directly from this document.

HP Jetdirect JDI Print Servers

J7949E (JDI)

J7949E HP Jetdirect Inside 10/100Base-T Ethernet

Right-click here, select ‘Save Target As’, and save as default file name J7949E_V3321.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Name = J7949E_V3321.dld

Size = 3876352

Version = V.33.21

CIDate = 08/03/2010

HP Jetdirect EIO Internal Print Servers

J311XX (600N) SERIES

NOTE: To download, right-click the .dld in the Firmware download column below, select All files, select Save as type, select the .dld file type, and then click Save. Be sure to use the default filename and do NOT rename it.

Model

Jetdirect Print Server

Firmware download

File details

J3110A

HP Jetdirect 600n

10Base-T – Ethernet

G0849en.dld

Size = 1722000

Version = G.08.49

J3111A

HP Jetdirect 600n

10Base-T- Ethernet/LocalTalk

G0849en.dld

Size = 1722000

Version = G.08.49

J3112A

HP Jetdirect 600n

Token Ring

G0849tr.dld

Size = 1529000

Version = G.08.49

J3113A

HP Jetdirect 600n

10/100Base-T – Ethernet

G0849fe.dld.

Size = 1734000

Version = G.08.49

J3110A HP Jetdirect 600n 10Base-T – Ethernet

Right-click here, select ‘Save Target As’, and save as default file name G0849en.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 1722000

Version = G.08.49

J3111A HP Jetdirect 600n 10Base-T – Ethernet/LocalTalk

Right-click here, select ‘Save Target As’, and save as default file name G0849en.dld. Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 1722000

Version = G.08.49

J3112A HP Jetdirect 600n – Token Ring

Right-click here, select ‘Save Target As’, and save as default file name G0849tr.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 1529000

Version = G.08.49

J3113A HP Jetdirect 600n 10/100Base-T – Ethernet

Right-click here, select ‘Save Target As’, and save as default file name G0849fe.dld. Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 1734000

Version = G.08.49

J416XX (610N) SERIES

J4169A HP Jetdirect 610n 10/100-TX – Ethernet

Right-click here, select ‘Save Target As’, and save as default file name J4169A_L2557.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 2248000

Version = L.25.57

J4167A HP Jetdirect 610n Token Ring Right-click here, select ‘Save Target As’, and save as default file name L2547tr.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 2218000

Version = L.25.47

J6057A (615N) PRINT SERVER

J6057A HP Jetdirect 615n EIO Internal Print Server – 10/100Base-TX Fast Ethernet

Right-click here, select ‘Save Target As’, and save as default file name 615N_R2557.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 2248000

Version = R.25.57

620N PRINT SERVER

J7934A HP Jetdirect 620n EIO Internal Print Server – 10/100Base-TX Fast Ethernet

Right-click here, select ‘Save Target As’, and save as default file name 620N_V2926.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 2390000

Version = V.29.26

J7934G HP Jetdirect 620n EIO Internal Print Server – 10/100Base-TX Fast Ethernet

Right-click here, select ‘Save Target As’, and save as default file name 620N_V2926.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 2390000

Version = V.29.26

625N PRINT SERVER

J7960A HP Jetdirect 625n EIO Internal Print Server – 10/100/1000Base-TX Fast Ethernet/Gigabit

Right-click here, select ‘Save Target As’, and save as default file name 625N_V2920.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 2443000

Version = V.29.20

J7960G HP Jetdirect 625n EIO Internal Print Server – 10/100/1000Base-TX Fast Ethernet/Gigabit

Right-click here, select ‘Save Target As’, and save as default file name 625N_V2920.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 2443000

Version = V.29.20

630N PRINT SERVER

J7997G HP Jetdirect 630n EIO IPsec Internal Print Server – Fast Ethernet/Gigabit

Right-click here, select ‘Save Target As’, and save as default file name 630N_V3805.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 3945000

Version = V.38.05

635N PRINT SERVER

J7961A HP Jetdirect 635n EIO IPsec Internal Print Server – Fast Ethernet/Gigabit

Right-click here, select ‘Save Target As’, and save as default file name 635N_V4116.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 5383000

Version = V.41.16

J7961G HP Jetdirect 635n EIO IPsec Internal Print Server – Fast Ethernet/Gigabit

Right-click here, select ‘Save Target As’, and save as default file name 635N_V4116.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 5383000

Version = V.41.16

640N PRINT SERVER

J8025A HP Jetdirect 640n Print Server

Right-click here, select ‘Save Target As’, and save as default file name 640N_V4536.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 13147000

Version = V.45.36

HP Jetdirect LIO Internal Print Servers

J6042B (250M) PRINT SERVER

NOTE: Only Jetdirect 250m models J6042B can be updated. J6042A models cannot. Call HP for help with J6042A models.

J6042B HP Jetdirect 250m LIO Internal Print Server – 10/100Base-TX Fast Ethernet

Right-click here, select ‘Save Target As’, and save as default file name N2547fe.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 2464000

Version = N.25.47

HP Jetdirect MIO Internal Print Servers

J237XX SERIES

J2371A HP Jetdirect MIO – 10Base-T Ethernet

Right-click here, select ‘Save Target As’, and save as default file name c0319en.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 803000

Version = C.03.19

J2372A HP Jetdirect MIO – 10Base-T Ethernet

Right-click here, select ‘Save Target As’, and save as default file name c0319en.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 803000

Version = C.03.19

J2373A HP Jetdirect MIO – Token Ring

Right-click here, select ‘Save Target As’, and save as default file name c0319tr.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 723000

Version = C.03.19

J255XX SERIES

J2550A HP Jetdirect MIO – 10Base-T Ethernet

Right-click here, select ‘Save Target As’, and save as default file name a0505en.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 1167000

Version = A.05.05

J2550B HP Jetdirect MIO – 10Base-T Ethernet

Right-click here, select ‘Save Target As’, and save as default file name A0849en.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 1344000

Version = A.08.49

J2552A HP Jetdirect MIO – 10Base-T Ethernet and LocalTalk

Right-click here, select ‘Save Target As’, and save as default file name a0505en.dld. Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 1167000

Version = A.05.05

J2552B HP Jetdirect MIO – 10Base-T Ethernet and LocalTalk

Right-click here, select ‘Save Target As’, and save as default file name A0849en.dld. Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 1344000

Version = A.08.49

J2555A HP Jetdirect MIO – Token Ring

Right-click here, select ‘Save Target As’, and save as default file name a0506tr.dld. Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 994000

Version = A.05.06

J2555B HP Jetdirect MIO – Token Ring

Right-click here, select ‘Save Target As’, and save as default file name A0849tr.dld. Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 1153000

Version = A.08.49

J2556B HP Jetdirect MIO 10Base100-TX – Ethernet

Right-click here, select ‘Save Target As’, and save as default file name A0535fe.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 1123000

Version = A.05.35

J410XX (400N) SERIES

J4100A HP Jetdirect 400n MIO – 10/100Base-TX Fast Ethernet and BNC

Right-click here, select ‘Save Target As’, and save as default file name K0849fe.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 1715000

Version = K.08.49

J4105A HP Jetdirect 400n MIO – Token Ring

Right-click here, select ‘Save Target As’, and save as default file name K0849tr.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 1511000

Version = K.08.49

J4106A HP Jetdirect 400n MIO – 10Base-T Ethernet

Right-click here, select ‘Save Target As’, and save as default file name K0849en.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 1713000

Version = K.08.49

HP Jetdirect External Print Servers

J238XX (EX) SERIES

J2382A HP Jetdirect EX 10Base-T/BNC – Ethernet

Right-click here, select ‘Save Target As’, and save as default file name b0319en.dld. Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 754000

Version = B.03.19

J2382B HP Jetdirect EX 10Base-T/BNC – Ethernet

Right-click here, select ‘Save Target As’, and save as default file name b0319en.dld. Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 754000

Version = B.03.19

J2383A HP Jetdirect EX – Token Ring

Right-click here, select ‘Save Target As’, and save as default file name b0319tr.dld. Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 672000

Version = B.03.19

J2383B HP Jetdirect EX – Token Ring

Right-click here, select ‘Save Target As’, and save as default file name b0319tr.dld. Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 672000

Version = B.03.19

J259XX (EX PLUS AND EX PLUS 3) SERIES

J2591A HP Jetdirect EX Plus 10Base-T/BNC – Ethernet

Right-click here, select ‘Save Target As’, and save as default file name E0849en.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 1413000

Version = E.08.49

J2593A HP Jetdirect EX Plus 3 10Base-T/BNC – Ethernet

Right-click here, select ‘Save Target As’, and save as default file name D0849en.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 1414000

Version = D.08.49

J2594A HP Jetdirect EX Plus 3 (3 Port) – Token Ring

Right-click here, select ‘Save Target As’, and save as default file name D0849tr.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 1212000

Version = D.08.49

J326XX (500X) SERIES

J3264A HP Jetdirect 500x – Token Ring

Right-click here, select ‘Save Target As’, and save as default file name J0849tr.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 1705000

Version = J.08.49

J3265A HP Jetdirect 500x 10/100Base-TX (3 Port) – Fast Ethernet

Right-click here, select ‘Save Target As’, and save as default file name 500X_J0867.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 1892000

Version = J.08.67

J7983G (510X) SERIES

J7983G HP Jetdirect 510x external print server

Right-click here, select ‘Save Target As’, and save as default file name 510X_J0867.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 1937000

Version = J.08.67

J326XX AND J4101X (300X) SERIES

J3263A HP Jetdirect 300x 10/100TX – Ethernet

Right-click here, select ‘Save Target As’, and save as default file name 300X_H0867.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 1890000

Version = H.08.67

J3263G HP Jetdirect 300x 10/100TX – Ethernet

Right-click here, select ‘Save Target As’, and save as default file name 300X_H0867.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 1890000

Version = H.08.67

J4101A HP Office Connect 300x Fast Ethernet/802.3 10/100Base-TX

Right-click here, select ‘Save Target As’, and save as default file name 300X_H0867.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 1890000

Version = H.08.67

J4101B HP Office Connect 300x Fast Ethernet/802.3 10/100Base-TX

Right-click here, select ‘Save Target As’, and save as default file name 300X_H0867.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 1890000

Version = H.08.67

J60XXX (310X) PRINT SERVER

J6038A HP Jetdirect 310x External Print Server (USB) – 10/100Base-TX Fast Ethernet

Right-click here, select ‘Save Target As’, and save as default file name Q2549fe.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 2543000

Version = Q.25.49

EN3700 PRINT SERVER

J7942A HP Jetdirect en3700 External Print Server (USB) – 10/100Base-TX Fast Ethernet

Right-click here, select ‘Save Target As’, and save as default file name en3700_V2822.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 2613000

Version = V.28.22

J7942G HP Jetdirect en3700 External Print Server (USB) – 10/100Base-TX Fast Ethernet

Right-click here, select ‘Save Target As’, and save as default file name en3700_V2822.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 2613000

Version = V.28.22

EN1700 PRINT SERVER

J7988G HP Jetdirect en1700 External Print Server (USB) – 10/100Base-TX Fast Ethernet

Right-click here, select ‘Save Target As’, and save as default file name en1700_V3612.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 3631000

Version = V.36.12

HP Jetdirect Wireless Print Servers

EW2400, EW2500, 280M, 380X, 680N, 690N, AND 695N PRINT SERVERS

J6061A HP Jetdirect 380x Wireless External Print Server

Right-click here, select ‘Save Target As’, and save as default file name S2539wb.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 2995000

Version = S.25.39

J6058A HP Jetdirect 680n Wireless EIO Internal Print Server

Right-click here, select ‘Save Target As’, and save as default file name U2539wb.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 2595000

Version = U.25.39

J6044A HP Jetdirect Wireless 280m Wireless LIO Internal Print Server

Right-click here, select ‘Save Target As’, and save as default file name T2539wb.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 2977000

Version = T.25.39

J7951AHP Wireless Print Server ew2400 High Speed USB

Right-click here, select ‘Save Target As’, and save as default file name ew2400_V2887.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 3081000

Version = V.28.87

J7951G HP Wireless Print Server ew2400 High Speed USB

Right-click here, select ‘Save Target As’, and save as default file name en2400_V2887.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 3081000

Version = V.28.87

J8007G HP Jetdirect 690n IPv6/IPSec 802.11g Wireless Print Server

Right-click here, select ‘Save Target As’, and save as default file name 690N_V4116.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 5625000

Version = V.41.16

J8024A HP Jetdirect 695nw Wireless Print Server

Right-click here, select ‘Save Target As’, and save as default file name 695N_V4536.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 13147000

Version = V.45.36

J8021A HP Wireless Print Server ew2500 High Speed USB

Right-click here, select ‘Save Target As’, and save as default file name ew2500_V4116.dld Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 5730000

Version = V.41.16

HP Jetdirect Print Servers with Embedded Networking

J6077A Embedded Networking for various printers

Right-click here, select ‘Save Target As’, and save as default file name B2538b3.dld . Be sure to save it as a .dld file by selecting All files for Save as type.

Size = 3434000

Version = B.25.38