HP LaserJet M608 Paper Jam – How to Fix Constant Jams and Restore Smooth Printing
Nothing halts productivity like a persistent HP LaserJet M608 paper jam. Whether you’re printing invoices, reports, or labels, a jammed printer causes delays, frustration, and sometimes even damage to your machine. Fortunately, with a little knowledge and the right approach, most jams are completely fixable — and often preventable.
This guide breaks down everything you need to know about fixing and preventing HP LaserJet M608 paper jams, along with support options for those ready to hand it off to the pros.
🧭 Quick Overview: HP LaserJet M608 Paper Jam Fixes at a Glance
📌 Common triggers: Tray 2 misfeeds, worn rollers, fuser jams, and paper type mismatches
🔧 DIY friendly: Many HP LaserJet M608 paper jam issues can be resolved at your desk
📍 Professional help: Same-day onsite service across Orange County & parts of Los Angeles
🔄 Models covered: HP LaserJet Enterprise M608, M607, and M609
📋 Outline:
What Causes an HP LaserJet M608 Paper Jam?
Step-by-Step: How to Clear a Paper Jam in an HP M608
Dealing with Tray 2 & Fuser Jam Errors
When Your HP M608 Is Constantly Jamming
Maintenance Kits and Long-Term Jam Prevention
Trusted Local Help for HP M608 Paper Feed Issues
Frequently Asked Questions
1. What Causes an HP LaserJet M608 Paper Jam?
The HP LaserJet M608 paper jam issue is usually due to one of four main culprits: worn feed rollers, incorrect paper settings, foreign debris in the path, or a failing fuser. Any of these can disrupt the smooth flow of paper, triggering a jam.
Top causes of paper jams in HP M608 printers:
Tray 2 paper misalignment or overfilling
Fuser issues where paper doesn’t exit cleanly
Roller wear from high monthly duty cycles
Improper paper weight/type selected in settings
Dusty or misaligned sensors misreporting jams
A quick inspection can often reveal the source of your HP LaserJet M608 paper jam — but identifying the pattern is key to long-term fixes.
2. Step-by-Step: How to Clear a Paper Jam in an HP M608
Before calling for service, try resolving the HP LaserJet M608 paper jam using the following process.
Step-by-step removal process:
Turn off the printer and unplug it
Remove Tray 2 and inspect the paper path
Check the rear door and fuser assembly for stuck or crumpled paper
Gently remove any jammed paper with two hands — don’t tug!
Clean paper path sensors with isopropyl alcohol
Check paper guides and tray settings
Power the printer back on and run a test job
If the HP LaserJet M608 paper jam returns immediately, you’re likely dealing with worn rollers or a fuser issue — both are common after 150,000 pages printed.
3. Dealing with Tray 2 & Fuser Jam Errors
The dreaded 13.A4.D4 jam error is common in the HP Laserujet M608 series. It means the paper jammed while leaving Tray 2 but before reaching the registration roller. This is one of the most frequent HP LaserJet M608 paper jam locations.
Fixing jam errors in Tray 2 and the fuser:
Pull out Tray 2 fully and look toward the rear
Remove any curled, skewed, or jammed paper
Replace the pickup rollers and separation pads if the issue repeats
Open the fuser door, let it cool, and inspect for wrapped paper
Be careful not to damage the fuser sleeve during removal
If you notice melted toner on a stuck page, it’s time to replace the fuser. You can get that done same-day through HP LaserJet M608 Fuser Error repair »
4. When Your HP M608 Is Constantly Jamming
It’s one thing to clear a jam once. But when you’re dealing with an HP M608 constant paper jam, something deeper is going on. And no amount of removing stuck paper will fix worn-out parts.
Symptoms of a failing paper path:
Frequent HP LaserJet M608 paper jam errors even after clearing
Jams in the same location every time (often Tray 2 or fuser)
Wrinkled or misaligned printouts
Printer attempts to pick paper but fails
You might need a roller kit, a fuser replacement, or full maintenance. If your M608 has passed 200K prints, the wear and tear is expected.
5. Maintenance Kits and Long-Term Jam Prevention
HP recommends installing a maintenance kit on the M608 every 200,000 pages. It addresses the exact parts that typically cause recurring HP LaserJet M608 paper jam errors.
What comes in a kit?
Fuser assembly
Pickup rollers (Tray 1, 2)
Separation pads
Transfer roller (optional)
These components restore proper grip, pressure, and alignment — all critical to smooth paper feeding. We offer OEM HP M608 maintenance kit installation as part of our standard service.
👉 See our HP Laserjet Printer Repair page » for more info.
6. Trusted Local Help for HP M608 Paper Feed Issues
If you’re in Orange County or Los Angeles County and struggling with an HP LaserJet M608 paper jam, you don’t have to go it alone. At Printer Repair Experts, we specialize in resolving paper jams fast — usually same-day.
We fix:
Tray 2 jams and misfeeds
Fuser jams with melted toner
M608 feed roller failures
Repeated 13.xx.xx error codes
HP M608 paper feed issues caused by worn parts
- HP Color Laserjet Printer Repair and HP Laserjet Printer Repair
Yes, if done gently. Always power off first and avoid pulling paper backward from the output tray.
Our team stocks genuine HP OEM parts, including fusers and roller kits — ready for same-day installation. Whether it’s an M608, M607, or M609, we’ve got you covered.
The sooner you stop wrestling with the HP LaserJet M608 paper jam issue, the sooner your team gets back to full productivity. We’ve helped hundreds of offices across Southern California do just that.
✅ Over 20 years of hands-on experience
✅ Same-day printer repair across OC and LA
✅ 6-month warranty on all service and parts
✅ We fix M608, M607, and M609 printer jams and errors
✅ We aslo fix HP Laserjet M607, M608, M609 Fuser Error
✅ We fix M608, M607, and M609 printer jams and errors
🛠️ Schedule a visit »
📞 Call now: (888) 276-4666
📧 Email: info@printer-repair-experts.net
Let’s clear that jam — for good.
FAQ's - Frequently Asked Questions
Tray 2 is prone to misfeeds due to roller wear or skewed paper. Replacing rollers and aligning paper can fix it.
This is a common HP LaserJet M608 paper jam code indicating blockage between Tray 2 and the registration area.
Yes — it replaces the key components most responsible for jams. Especially needed after 200,000 pages.
Absolutely. A worn or overheated fuser can crumple paper or cause jams inside the output path.
Yes, if done gently. Always power off first and avoid pulling paper backward from the output tray.