HP LASERJET M607 M608 M609 PRINTER REPAIR   |   PRINTER REPAIR M607   |  PRINTER REPAIR M608   |  PRINTER REPAIR M609

 

HP LASERJET M607, M608, M609 PRINTER REPAIR 

 

HP LASERJET M607 PRINTER REPAIR

HP LASERJET M607 PAPER JAM

HP LASERJET M607 FUSER ERROR

HP LASERJET M607 PERFORM MAINTENANCE 

 HP LASERJET M608 PRINTER REPAIR

HP LASERJET M608 PAPER JAM

HP LASERJET M608 FUSER ERROR

HP LASERJET M608 PERFORM MAINTENANCE

 HP LASERJET M609 PRINTER REPAIR

HP LASERJET M609 PAPER JAM

HP LASERJET M609 FUSER ERROR

HP LASERJET M609 PERFORM MAINTENANCE

 

 MODEL NUMBER INTRODUCTION DATE  PRINT SPEED   TONER CARTRIDGES  MAINTENANCE KIT
HP LASERJET M607 MAY 2017  55 PRINTS PER MINUTE   CF237A  HP 37A (11,000 Prints)
CF237X HP 37X (25,000 Prints)
CF237Y HP 37Y (41,000 Prints)
L0H24A (110v)
L0H25A (220v) 
HP LASERJET M608 MAY 2017 65 PRINTS PER MINUTE  CF237A  HP 37A (11,000 Prints)
CF237X HP 37X (25,000 Prints)
CF237Y HP 37Y (41,000 Prints)
 L0H24A (110v)
L0H25A (220v) 
HP LASERJET M609 MAY 2017 75 PRINTS PER MINUTE  CF237A  HP 37A (11,000 Prints)
CF237X HP 37X (25,000 Prints)
CF237Y HP 37Y (41,000 Prints)
 L0H24A (110v)
L0H25A (220v) 

 

HP Laserjet M608 Printer cartridges have a long track record of being dependable. With a variety of new technologies in print technology, the HP Laserjet M609 Printer is a logical choice. As a long-time favorite for office and home users alike, the HP Laserjet M609 Printer continues to grow in popularity.

Another advantage of upgrading to the HP Laserjet M607 Printer is that consumers will experience increased reliability. This is due primarily to the increased durability and robustness of the parts used to build the HP Laserjet M608 Printer. both of these combined make for a more reliable HP Laserjet Printing product.

10.00.00 e-label Memory Error
The hp device is not able to recognize the cartridge data. The toner cartridge is found but malfunctioning. Whenever this error shows, a question mark [?] shows up on supplies due to the issue.

10.00.10 e-label Missing Memory Error
The HP Laserjet printer is unable to discover the e-label. This error code suggests that the hp laser printer has determined that the e-label is not there. Anytime this error occurs, a question mark presents itself on supply with the issue.

Remedy
1.  Turn the printer off, and then on.
2.  If the error code persists, change out the toner cartridge.
3.  If the error code continues, please contact Printer Repair Experts Customer Care (888) 276-4666.

10.00.30 Used Supply In Use 
A used supply is being used at the time 

10.23.15 Install Fuser kit 
The fixing assembly isn't installed properly.  

10.23.60 Fuser Kit low
The hp device indicates whenever a supply level is low

10.23.70  Replace Fuser Kit 

Remedy
No action needed

13.00.EE 
Undetermined door ajar. 

Remedy
1. Verify that all of the doors and covers are closed. 
2. If the malfunction continues, please contact Printer Repair Experts Customer Care (888) 276-4666

13.00.FF Residual jam. 
13.A1.A1 Paper stay jam from the paper tray 
Media didn't exit the Tray 1 feed sensor (PS4750) within a defined time frame when printing through Tray 1. 

13.A1.D1 Paper delay jam from tray 1 
 Pages did not leave the Tray 1 feed sensor (PS4750)  within a specific period when printing via Tray 1.

13.A3.FF Residual paper jam in Tray X. 
This paper jam occurs when residual paper is discovered within the paper  tray X feed sensor. 

13.A4.Dz Paper delay jam in Tray 4.
The 550 sheet feeders may be stacked for 3 extra trays. These types of trays include identical sensors & connectors. 

13.A4.D4 
Paper did not exit Tray 4 feed sensor in the designated period whenever printing using Tray 4. 

13.A4.D5 
Media failed to exit Tray 4 feed sensor inside the specific time frame when printing using Tray 5. 

13.AA.EE Front Door Open 
The front door was not closed during printing.  

13.AB.EE Rear Door Open 
The rear door was ajar whilst printing.  

Remedy
Close the rear door to allow for the hp device to attempt to clear the paper jam.

13.B2.Az Jam in the rear door 
Pages stay jam in the rear door around the image area. Media present at registration sensor (PS4550) following an allocated time limit has been exceeded. 

13.B2.A1
This particular paper jam occurs while the registration sensor (PS4550) identifies Paper present longer than the anticipated time depending on the Pages size any time printing from Tray 1.  

13.B2.A2
The media jam shows while the registration sensor (PS4550) notices Pages present more than the required time-based size when printing through Tray 2.  

13.B2.A3
This paper jam appears the moment the registration sensor (PS4550) notices Paper present much longer than the required time-period dependent size when printing via Tray 3.  

13.B2.AD
This particular jam shows in the event the registration sensor (PS4550) notices Paper exhibit longer anticipated time depending on size when printing via the duplexer.  

13.B2.D1
Jam in rear door Paper delay jam at the back door right at the image area. 
Paper passed Tray 1 feed sensor PS4750 but couldn't get through registration sensor (PS4550) in set time whenever printing through Tray 1.

Pages delay jam around the image area. Pages couldn't reach the registration sensor (PS4550) in set time while printing from Tray 2.

13.E1.D3 Fuser Area Jam Output delivery delay jam
Paper failed to reach the output bin full sensor in the specified time.

13.FF.FF A power-on residual media jam has developed. This event has no targeted sensor designated. It may be any sensor around the paper feed path.

Remedy
1. Follow the guidance along the control panel to remove the jam. Inspect for media in all likely jam regions.
2. Verify that any doors are open. 
3. Open the rear end door and close the rearward door to enable the printer to try to clear the paper jam message
4. Confirm the paper tray to ensure that Paper is loaded correctly. The paper guides are suppose to be adjusted to the ideal size, and the tray should not be stocked above maximum fill marks or tabs. 
5. Verify that the Paper satisfies standards for this hp printer. 
6. Use a damp, lint-free cloth to clean the rollers in the appropriate tray. Replace worn rollers. 
7.  In the event the error continues, please contact Printer Repair Experts Customer Care (888) 276-4666.

50.1x.yz Low fuser temperature failure 
x = fuser mode, y = previous printer sleep state, and z = next printer sleep state.

50.2X.YZ Fuser warm-up error 

50.2F.00  

50.3X.YZ High fuser temperature

50.4X.YZ Drive circuit fault 

50.6X.YZ Open fuser circuit (heating element failure)

 50.7F.00 Fuser pressure-release mechanism failure

 50.9X.YZ High fuser temperature 2

 50.AX.YZ Low fuser temperature 3

 50.BX.YZ High fuser temperature 3

 Remedy
1. Power off the printer. 
2. Remove, and then reinstall the fixing assembly

CAUTION: The fixing assembly may be heated. 

a. Open the rear door. 
b. Grab the blue handles on each side of the fuser and pull right out to remove i
c.  Install a new fixing assembly, or reseat the fuser
d. Close the front door. 

3. If the malfunction remains, please contact Printer Repair Experts Customer Care (888) 276-4666

51.00.10 Beam detect error 
51.00.19 Laser malfunction
52.00.00 laser/scanner startup error.
52.00.20 laser/scanner rotation error.
55.00.01 DC controller memory error. 
55.00.03 DC controller no engine response. 
55.00.04 DC controller communications time out
55.00.05 Engine Firmware RFU Error 

The firmware upgrade failed 

55.01.06, Error DC controller  To continue to power off printer and the power on the printer.
55.02.06  Error DC controller To continue to power off printer and the power on the printer..
56.00.YZ  The printer experienced a communication error with the optional paper trays.
57.00.01 Fan failure Cartridge upper (FM3) failure
57.00.02 Fan failure Cartridge lower fan (FM4) error.
57.00.03 Fan failure Duplex fan FM2 failure.
57.00.04 Fan failure Scanner fan FM1 failure.
58.00.02 Error Environmental sensor failure
58.00.03 Error DC controller failure.
58.00.04 Error Low-voltage power supply unit malfunction.
58.01.04 Error 24V power supply error during operation.
59.00.00 Motor error Tray lift motor M3 failure.

Remedy
1. shut down the printer, and then turn it on. 
2. Reinstall the print engine firmware. 
3. If the problem carries on, contact Printer Repair Experts Customer Care (888) 276-4666

© 2021 Printer-Repair-Experts.net   |   BLOG